How to Mint Runes? 如何铸造符文？

Go to Mint option on page https://unisat.io/runes/inscribe. 

转到页面 https://unisat.io/runes/inscribe 上的 Mint 选项。
Or you could explore Rune information on https://unisat.io/runes/list and Click ‘Mint Directly’ button if the rune can be mintable for more convenience.

或者，您可以在 https://unisat.io/runes/list 上探索符文信息，如果符文可以铸造，请单击“直接铸造”按钮，以更加方便。
You could input the Rune or Rune ID as below.

您可以输入符文或符文 ID，如下所示。
You can input the number of Repet Mint or use the slide bar for batch minting.

您可以输入重复铸造的数量或使用滑动条进行批量铸造。
Let’s take the Rune: EVERYONE.LOVES.NATURE.FOREVER for example.

让我们以符文：EVERYONE.LOVES.NATURE.FOREVER 为例。
There will be 500E for one minting. If Repeat Mint=53, the balance is 500*53=26500E 

铸造1枚将有500E。如果Repeat Mint=53，则余额为500*53=26500E
EVERYONE.LOVES.NATURE.FOREVER after minting transaction was confirmed. At the same time, the Cap of this Rune was reduced from 4,000,000 to 3,999,947.

铸币交易确认后，每个人都热爱自然。同时，该符文的上限从400万减少到3999947。
After the transaction (including etching, minting, etc) has been confirmed on chain, you may refer to the following formula for the current total supply of Rune：

当交易（包括蚀刻、铸造等）在链上确认后，当前符文的总供应量可以参考以下公式：
Supply=Premine+Amount*Mints

供应量=预挖+数量*薄荷币数量
1) If Premine=1000, the Rune is mintable and Amount=100, Mints=90, then Supply=1000+100*90=10000;2）

1) 如果预挖=1000，符文可铸造，数量=100，铸造量=90，则供应量=1000+100*90=10000；2）
2) If Premine=0, the Rune is mintable and Amount=100, Mints=90, then Supply=0+100*90=9000;3）

2) 如果预挖=0，则符文可铸造，数量=100，铸造量=90，则供给=0+100*90=9000;3）
3) If Premine=10000, the Rune is non-mintable, then Supply=10000+0*0=10000;4）

3）如果Premine=10000，该符文不可铸造，则Supply=10000+0*0=10000;4）
4) If Premine=0, the Rune is non-mintable, then Supply=0+0*0=10000.(This Rune is Cenotaph)

4) 如果Premine=0，该符文不可铸造，则Supply=0+0*0=10000。（该符文为纪念碑）

How to Etch Runes? 如何蚀刻符文？

You may visit https://unisat.io/runes/inscribe to get the page.

您可以访问 https://unisat.io/runes/inscribe 获取该页面。
Input the parameters as needed.

根据需要输入参数。
For example： 例如：
The Rune Name is EVERYONE.LOVES.NATURE.FOREVER,

符文名称是 EVERYONE.LOVES.NATURE.FOREVER，
Symbol is E, 符号为E，
It is Mintable, and Amount was settled as 500, Cap for 4,000,000.

可Mintable，Amount 结算为500，Cap 为4,000,000。
The Premine is 15,000. 预挖是 15,000。
And leave other fields empty.Then you could input the above needed text as shown below,

然后将其他字段留空。然后您可以输入上面所需的文本，如下所示，
Please note: you need to wait for 5 blocks confirmations for etching.

请注意：蚀刻需要等待5个区块确认。
After the Rune is confirmed as valid, the etcher will get 15000E EVERYONE.LOVES.NATURE.FOREVER. Meantime, the others can mint Rune EVERYONE.LOVES.NATURE.FOREVER.

符文确认有效后，蚀刻者将获得15000E EVERYONE.LOVES.NATURE.FOREVER。与此同时，其他人可以铸造符文，每个人都热爱自然，永远。
Following is the introduction for each parameter:

以下是各个参数的介绍：
Rune: Runes name, (currently you can ethi 13-26 characters long, can be separated by a middle dot ·, and the separator does not count towards the character limit).

Rune：符文名称，（目前长度可以是13-26个字符，中间可以用点·分隔，分隔符不计入字符数限制）。
Symbol (optional): The symbol after the number of runes, which can be A-Z or empty. If empty, a general symbol ¤ will be used.

符号（可选）：符文数量后面的符号，可以是A-Z或空。如果为空，则将使用通用符号 ¤。
Mintable: Toggle off to disable further minting. Runes are only premine upon creation.

Mintable：关闭以禁用进一步铸造。符文仅在创建时才被预先开采。
Amount: The Amount field contains the amount of runes each mint transaction receives.

金额：金额字段包含每个铸币交易收到的符文数量。
Cap: The number of times a rune may be minted is its cap. A mint is closed once the cap is reached.

上限：一个符文可以铸造的次数就是它的上限。一旦达到上限，铸币厂就会关闭。
Advanced options: Set up premining, divisible figures, and the starting or ending block where minting is possible (optional).

高级选项：设置预挖掘、可整除数字以及可以铸造的起始或结束区块（可选）。
Premine : The etcher of a rune may optionally allocate to themselves units of the runes being etched. This allocation is called a premine.

预挖掘：符文的蚀刻者可以选择为自己分配被蚀刻的符文单位。这种分配称为预挖。
Divisibility (optional): A rune’s divisibility is how finely it may be divided into its atomic units. Divisibility is expressed as the number of digits permissible after the decimal point in the amount of runes. A rune with divisibility 0 may not be divided. A unit of a rune with divisibility 1 may be divided into ten sub-units, a rune with divisibility 2 may be divided into a hundred, and so on.

可分割性（可选）：符文的可分割性是指它可以被分割成原子单位的精细程度。可整除性表示为符文数量中小数点后允许的位数。整除性为 0 的符文不能被分割。整除度为1的符文可以分为十个子单元，整除度为2的符文可以分为一百个，以此类推。
Absolute Height: The absolute block height (based on the current block height).

绝对高度：绝对区块高度（基于当前区块高度）。
Relative Height：The range of relative block heights (based on the block of etching real).

相对高度：相对块高度的范围（以实际蚀刻的块为准）。
Start Height：A mint is open starting in the block with the given start height.

起始高度：铸币厂在给定起始高度的区块中开始开放。
End Height：A rune may not be minted in or after the block with the given end height.

结束高度：不能在给定结束高度的块内或之后铸造符文。
Minded: You can find the Premine setting on the pop-up page after clicking Advanced Options.

Minded：点击高级选项后，在弹出的页面中可以找到Premine设置。